Smart Zigbee 32.8Ft RGB LED Strip Lights Dimmable Kit with Zigbee 3.0

$30.03

ZigBee Hub Required,The ZigBee LED Controller Compatible with Zigbee hub Bridge, ZigBee Gateways,Echo Plus and Tuya Smart Hub,If there is no ZigBee gateway,the Smart LED light strip can't work
Smart APP Control lighting from anywhere:Install the APP.Even if you are not at home,you can use mobile phones for smart lighting control.Or set a schedule save your time,turn on the light before you get home.【NOTE:This RGB light strip Kit has no pure white light,but a white light mixed with R.G.B.】
Smart Voice Control:Use simple voice commands to adjust brightness,change colors or turn lights on/off.【No gateway is required, this Zigbee 3.0 Controller can work directly with: Echo Plus (2nd Gen),Echo (4th Gen),Echo Studio,Echo Show (2.Gen) and other smart speakers with built-in zigbee3.0 protocol】
Dimmable Brightness 1%-100%% and millions of colors for your choice.It can be combined according to each mood to create the relaxing personal space. or Enjoy a romantic dinner party.Vibrant colored lighting adds fun to your life.
32.8ft (10m) long light strip can cover a larger area and realize a wider range of applications.Comes with ZigBee RGB Controller&12V Power Adapter,Very suitable for decorating your living room, bedroom,office and other places.This zigbee led Kit is not compatible with HomeKit.

Product description

Connect the LED product to the controller,
Start the device searching on the ZigBee Light Link Gateway, it could take some time.(If the Gateway does not find the device, plug power off/on or make a reset.)
The Gateway found your device and you can assign it to the different rooms/zones/groups.

Reset ZigBee LED Controller:

Long press the button on the controller for more than 5 seconds

Switch on your device.
Now switch off and on within 2 seconds.Repeat off/on four times.
Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times.

NOTE:

Confirm that your device supports Zigbee Light Link before use.If you can't connect, please reset the controller.
Make sure the surface is clean and smooth before installing the light strip.Please press the lights strip with your finger to make it more solid paste when you install.